Ezeetile Verona Grout 5 Kg

Ezee Tile Grout  - is designed to point tile joints up to a width of 8mm on walls and floors. It has a
very high resistance to shrinkage and also contains ingredients to give good workability.

MIXING INSTRUCTIONS

1. Empty contents into a suitable container and slowly add cold water in the following ratios:
i. 1.5 Lt of water per 5 Kg bag of grout
ii. 6 Lt of water per 20 Kg bag of grout
2. For high-stress application areas where additional mechanical or water resistance is required,
replace the mixing water with TUFF TILE BONDING LIQUID® in the same mixing ratios.
3. Mix to a creamy consistency. The use of an electric drill and paddle is recommended to ensure
thorough mixing.

SURFACE PREPARATION

(These recommendations are in accordance with the SABS standard SANS 10107:2011 - The design
and installation of ceramic tiles.)
1. The tile adhesive should be completely set before grouting can take place.
2. Ensure that joints to be grouted are sound (no cracks or crumbling), clean, free of dust and
contaminants.
3. Ensure that the joints are free of excess tile adhesive.
4. Grout joints should be slightly moistened but not wet.

APPLICATION

1. Apply EZEE TILE TILE GROUT® liberally to the surface and work into the joints with a grout
squeegee taking care to completely fill the joint.
2. Remove excess grout and level the surface by moving the grout squeegee diagonally across the
joints while the mix is still fresh.
3. Allow the grout to harden for 1 - 2 hours before removing the excess grout residue from the tiles
with a damp (but not wet) sponge. Rinse the sponge frequently to achieve the best results.
4. Once the grout has completely set (after 24 Hrs), polish the tiles with a dry soft cloth. A wet cloth
will not remove the thin film of grout residue.

COVERAGE

Since the coverage of this product is dependent upon the dimensions of the joints, the amount of
grout required can be accurately determined by the following formula:-
Kg of grout per Square meter = (A + B) x C x D x 1.7
(A x B)
Where
A = length of the tile in mm
B = width of the tile in mm
C = thickness of the tile in mm
D = average width of the joint in mm
As a guide, on average, a 5 Kg bag of grout will grout an area of 8 - 10 m²

PRECAUTIONS

1. Ensure that the above instructions are adhered to at all times and do not adulterate the product in
any way as this could result in failure.
2. Rubber gloves should be used when applying EZEE TILE TILE GROUT ®. In the event of irritation,
rinse skin under cold water. Consult a doctor if irritation persists.
3. Keep EZEE TILE TILE GROUT  away from pets and children.
4. Do not ingest and do not empty surplus adhesive down drains.